8. Remove the fan.
9. Remove the heat sink.
10. Remove the left speaker.
11. Remove the right speaker.
12. Remove the system board.
NOTE: The system board can be removed with the heat sink attached in order to simplify the procedure and preserve
the thermal bond between the system board and heat sink.
13. Remove the WLAN-antenna module.
14. Remove the power button.
15. Remove the keyboard.
About this task
Next steps
1. Install the keyboard.
2. Install the power button.
3. Install the WLAN-antenna module.
4. Install the system board.
5. Install the right speaker.
6. Install the left speaker.
7. Install the heat sink.
8. Install the fan.
9. Install the battery.
10. Install the display assembly.
11. Install the WWAN card.
12. Install the solid-state drive.
13. Install the base cover.
14. Install the SIM card.
15. Follow the procedure in After working inside your computer.
Removing and installing components
55
To Next Page
Loading...
