Next steps
1. Install the base cover.
2. Install the SIM card tray.
3. Install the SD card.
4. Exit service mode.
5. Follow the procedure in After working on your computer.
Display assembly
Removing the display assembly
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the SD card.
3. Remove the SIM card tray.
4. Enter service mode.
5. Remove the base cover.
About this task
The following images indicate the location of the display assembly and provide a visual representation of the removal procedure.
NOTE: The display assembly removal procedure is the same for both laptop and 2-in-1 chassis.
Removing and installing components 29
To Next Page
Loading...
