Steps
1. Align and place the right speaker in the slot on the system.
2. Replace the single (M1.6x1.8) screw that secure the right speaker to the system.
Next steps
1. Install the battery.
2. Install the WWAN card.
3. Install the base cover.
4. Install the SIM card tray.
5. Install the SD card.
6. Follow the procedure in After working on your computer.
Wireless Local Area Network (WLAN) Antenna module
Removing the WLAN antenna module
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the SD card.
3. Remove the SIM card tray.
4. Remove the base cover.
5. Remove the WWAN card.
6. Remove the battery.
About this task
The following images indicate the location of the WLAN antenna module and provide a visual representation of the removal
procedure.
40
Removing and installing components
To Next Page
Loading...
