Steps
1. Align and place the system chassis under the hinges of the display assembly.
2. Install the six (M2.5x5) screws that secure the display hinges to the laptop.
3. Connect the display cable to the system board. Connect and adhere the camera cable to the system board.
4. Place the display cable bracket in place and install the single (M1.6x3.5) screw securing the display cable bracket.
Next steps
1. Install the Battery.
2. Install the Base cover.
3. Install the SIM card tray
4. Install the microSD card.
5. Follow the procedure in After working on your computer .
Keyboard
Removing the keyboard
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
3. Remove the SIM card tray.
52
Removing and Installing Components
To Next Page
Loading...
