Dell Latitude XT3 Manual

Media Base 5
Docking Your Tablet-PC to the Media Base
CAUTION: If you are docking your Tablet-PC for the first time, complete the steps
in "Before Docking or Undocking Your Tablet-PC from the Media Base" on page 4,
before your proceed.
1 Follow the procedures in "Before Docking or Undocking Your Tablet-PC
from the Media Base" on page 4.
2 If this is the first time it is being docked to the media base, ensure that
your Tablet-PC is turned off .
3 Align the back of the Tablet-PC with the back of the media base, and lower
the Tablet-PC onto the media base.
4 Press the Tablet-PC onto the media base until it clicks and the Tablet-PC
is firmly seated.
5 Turn on the Tablet-PC.
The operating system recognizes the media base.
1 Tablet-PC 2 media base
1
2

Dell Latitude XT3 Specifications

General

Memory	Up to 8GB DDR3
Graphics	Intel HD Graphics 3000
Operating System	Windows 7 Professional
Wireless	Wi-Fi 802.11 a/b/g/n, Bluetooth 3.0
Processor	Intel Core i5 or i7
Display	13.3-inch HD (1366 x 768)
Storage	Up to 320GB HDD
Battery	6-cell
Touchscreen	Yes
Ports	USB 2.0, HDMI, VGA, RJ-45
Webcam	Yes