382 Managing Images and Files
Figure 14-9. Image Path
3
View information about the current image.
console#show version
Image Descriptions
image1 :default image
image2 :
Images currently available on Flash
4
Download the image to the switch. After you execute the
copy
command,
you must verify that you want to start the download.
The downloaded image replaces the currently inactive image, which may
be image1 or image2.Use either the
active
or
backup
keyword to have the
image to replace the specified image type (which takes effect only after a
reboot). In the following example, the active image is replaced.
console#copy
tftp://10.27.65.103/images/dell_0308.stk
imageactive
Mode........................................... TFTP
------- ------------ ------------ --------------- --------------
unit image1 image2 current-active next-active
------- ------------ ------------ --------------- --------------
1 4.1.0.7 5.0.0.8 image1 image1
To Next Page
Loading...
