Option Description
• 64 MB
• 128 MB
Table 11. Performance
Option Description
Multi Core Support This field specifies whether the process will have one or all cores enabled.
This option is enabled by default.
Intel SpeedStep Allows you to enable or disable the Intel SpeedStep mode of the processor.
This option is disabled by default.
C States Control Allows you to enable or disable additional processor sleep states. This option
is disabled by default.
Limited CPUID Value Allows you to limit the maximum value of the processor standard CPUID
function. This options is disable by default.
Intel TurboBoost Allows you to enable or disable the Intel TurboBoost mode of the processor.
This option is enabled by default.
Table 12. Power Management
Option Description
AC Recovery Determines how the system responds when AC power is re-applied after a
power loss. You can set the AC Recovery to:
• Power Off
• Power On
• Last Power State
This option is Power Off by default.
Auto On Time Sets time to automatically turn on the computer. Time is kept in standard
12-hour format (hour:minutes:seconds). Change the startup time by typing
the values in the time and AM/PM fields.
NOTE: This feature does not work if you turn off your computer using
the switch on a power strip or surge protector or if
Auto Power is set to
disabled.
Deep Sleep Control Allows you to define the controls when Deep Sleep is enabled.
• Disabled
• Enabled in S5 only
• Enabled in S4 and S5
This option is Disabled by default.
USB Wake Support Allows you to enable the USB devices to wake the computer from standby
mode.
Wake on LAN/WWAN This option allows the computer to power up from the off state when
triggered by a special LAN signal. This feature only works when the
computer is connected to AC power supply.
• Disabled - Does not allows the system to power on by special LAN
signals when it receives a wake-up signal from the LAN or wireless LAN.
33
To Next Page
Loading...
