Option Description
• LAN or WLAN - Allows the system to be powered on by special LAN or
wireless LAN signals.
• LAN Only - Allows the system to be powered on by special LAN signals.
• LAN with PXE Boot - A wakeup packet sent to the system in either the
S4 or S5 state, that will cause the system to wake-up and immediately
boot to PXE.
• WLAN Only - Allows the system to be powered on by special WLAN
signals.
This option is Disabled by default.
Block Sleep Allows you to block entering to sleep (S3 state) in OS environment. This
option is disabled by default.
Intel Ready Mode Allows you to enable the capability of Intel Ready Mode Technology. This
option is disabled by default.
Table 13. POST Behavior
Option Description
Adapter Warning Allows you to choose whether the system displays warning messages when
you use certain power adapters. This option is enabled by default.
Numlock LED Allows you to enable or disable the Numlock feature when your computer
starts. This option is enabled by default.
MEBx Hotkey Allows you to specify whether the MEBx Hotkey function should be enabled
when the system boots. This option is enabled by default.
Keyboard Errors Allows you to enable or disable the keyboard error reporting when the
computer starts. This option is enabled by default.
Fast Boot This option can speed up the boot process by bypassing some compatibility
steps:
• Minimal — The system boots quickly, unless the BIOS has been updated,
memory changed, or the previous POST did not complete.
• Thorough — The system does not skip any steps in the boot process.
• Auto — This allows the operating system to control this setting (this
works only when the operating system supports Simple Boot Flag).
This option is set to Thorough by default.
Table 14. Virtualization Support
Option Description
Virtualization This option specifies whether a Virtual Machine Monitor (VMM) can utilize
the additional hardware capabilities provided by Intel® Virtualization
Technology. Enable Intel Virtualization Technology - This option is
disabled by default.
VT for Direct I/O Enables or disables the Virtual Machine Monitor (VMM) from utilizing the
additional hardware capabilities provided by Intel® Virtualization technology
for direct I/O. Enable Intel Virtualization Technology for Direct I/O - This
option is disabled by default.
34
To Next Page
Loading...
