Option Description
Trusted Execution This option specifies whether a Measured Virtual Machine Monitor (MVMM)
can utilize the additional hardware capabilities provided by the Intel Trusted
Execution Technology. This option is disabled by default.
Table 15. Wireless
Option Description
Wireless Device Enable Allows you to enable or disable the internal wireless devices. All the options
are enabled by default.
Table 16. Maintenance
Option Description
Service Tag Displays the Service Tag of your computer.
Asset Tag Allows you to create a system asset tag if an asset tag is not already set. This
option is not set by default.
SERR Messages Controls the SERR message mechanism. This option is not set by default.
Some graphics cards require that the SERR message mechanism be
disabled.
BIOS Downgrade Allows you to control flashing of the system firmware to the previous
versions. This option is enabled by default.
NOTE: If this option is not selected, the flashing of the system firmware
to the previous versions is blocked.
Data Wipe Allows you to securely erase the data from all the available internal storages,
such as HDD, SSD, mSATA, and eMMC. This option is disabled by default.
BIOS recovery Allows you to recover the corrupted BIOS conditions from the recovery files
on the primary hard drive or an external USB key.
Table 17. Cloud Desktop
Option Description
Server Lookup Method Allows you to specify how the cloud desktop software will lookup server
addresses.
• Static
• DNS (Default)
Server Name Allows you to specify the name of the server
Server IP Address Specifies the primary static IP address of the cloud desktop server. The
default IP address is 255.255.255.255
Server port Specifies the primary port of the cloud desktop. The default setting is 06910.
Client Address Method Specifies how the client will obtain the IP address.
• Static IP
• DHCP (Default)
Client IP address Specifies the static IP address of the client. The default IP address is
255.255.255.255
35
To Next Page
Loading...
