Option Description
Client Subnet Mask Specifies the subnet mask address of the client. The default IP address is
255.255.255.255
Client Gateway Specifies the gateway address of the client. The default IP address is
255.255.255.255
DNS IP Address Specifies the DNS IP address of the client. The default IP address is
255.255.255.255
Domain Name Specifies the domain name of the client.
Advanced Allows you to turn on the Verbose mode for advanced debugging. This
option is disabled by default.
Table 18. System Logs
Option Description
BIOS Events Displays the system event log and allows you to:
• Clear Log
• Mark all Entries
Table 19. Advanced configurations
Option Description
ASPM Allows you to activate the state power management.
• Auto (Default)
• Disabled
• L1 Only
Updating the BIOS
It is recommended to update your BIOS (System Setup), on replacing the system board or if an update is
available. For laptops, ensure that your computer battery is fully charged and connected to a power
outlet
1. Restart the computer.
2. Go to Dell.com/support.
3. Enter the Service Tag or Express Service Code and click Submit.
NOTE: To locate the Service Tag, click Where is my Service Tag?
NOTE: If you cannot find your Service Tag, click Detect My Product. Proceed with the
instructions on screen.
4. If you are unable to locate or find the Service Tag, click the Product Category of your computer.
5. Choose the Product Type from the list.
6. Select your computer model and the Product Support page of your computer appears.
7. Click Get drivers and click View All Drivers.
The Drivers and Downloads page opens.
8. On the Drivers and Downloads screen, under the Operating System drop-down list, select BIOS.
9. Identify the latest BIOS file and click Download File.
36
To Next Page
Loading...
