Dell OptiPlex 3060 Micro - Removing and installing components; Recommended tools; Screw size list

Type UMA Graphics
Intel Core i3-8100T (4 Cores/6 MB/4T/3.1 GHz/35 W); supports
Windows 10/Linux
Intel HD Graphics 630
Intel Core i3-8300T (4 Cores/8 MB/4T/3.2 GHz/35 W); supports
Windows 10/Linux
Intel HD Graphics 630
Intel Core i5-8400T (6 Cores/9 MB/6T/up to 3.3 GHz/35 W);
supports Windows 10/Linux
Intel HD Graphics 630
Intel Core i5-8500T (6 Cores/9 MB/6T/up to 3.5 GHz/35 W);
supports Windows 10/Linux
Intel HD Graphics 630
Intel Core i7-8700T (6 Cores/12 MB/12T/up to 4.0 GHz/35 W);
supports Windows 10/Linux
Intel HD Graphics 630
Memory
Table 3. Memory specications
Minimum memory conguration
4 GB
Maximum memory conguration
32 GB
Number of slots
2 SODIMM
Maximum memory supported per slot
16 GB
Memory options
• 4 GB - 1 x 4 GB
• 8 GB - 1 x 8 GB
• 8 GB - 2 x 4 GB
• 16 GB - 2 x 8 GB
• 16 GB - 1 x 16 GB
• 32 GB - 2 x 16 GB
Type DDR4 SDRAM Non-ECC memory
Speed
• 2666 MHz
• 2400 MHz on Celeron, Pentium, and i3 processor
Storage
Table 4. Storage
specications
Type Form factor Interface Capacity
One Solid-State Drive (SSD) M.2 2230 or 2280
• SATA AHCI, Up to 6 Gbps
• PCIe 3 x4 NVME, Up to 32
Gbps
• SATA C20 SED SSD
• Up to 512 GB
• Up to 512 GB
• Up to 512 GB
One 2.5 inch Hard-Disk Drive
(HDD)
SATA AHCI, Up to 6 Gbps Up to 2 TB, upto 7200 RPM
12 System specications