Dell OptiPlex 3240 All-In-One - Power Management Screen Options

Option Description
• 3
Intel SpeedStep Allows you to enable or disable the Intel SpeedStep feature.
• Enable Intel SpeedStep
Default setting: The option is enabled.
C-States Control Allows you to enable or disable the additional processor sleep states.
• C states
Default setting: The option is enabled.
Limit CPUID Value Allows you to limit the maximum value of the Standard CPUID Fuction support.
Some operation systems will not complete installation when maximum CPUID
Function supported is greater than 3.
• Enable CPUID Limit - This option is disabled by default.
Intel TurboBoost Allows you to enable or disable the Intel TurboBoost mode of the processor.
• Enable Intel TurboBoost
Default setting: The option is enabled.
Hyper Thread
Control
Allows you to enable or disable the HyperThreading in the processor.
Default setting: The option is enabled.
Power management screen options
Option Description
AC Recovery Specifies how the computer will respond when AC power is applied after an AC
power loss. You can set the AC Recovery to:
• Power Off (default)
• Power On
• Last Power State
Auto On Time Allows you to set the time at which the computer must turn on automatically. The
options are:
• Disabled
• Every Day
• Weekdays
• Select Days
43