Option Description
Asset Tag Allows you to create a system asset tag if an asset tag is not already set. This option
is not set by default.
SERR Messages Controls the SERR message mechanism. This option is enabled by default. Some
graphics cards require that the SERR message mechanism be disabled.
BIOS Downgrade This controls flashing of the system firmware to previous revisions.
• Wipe on Next boot
Data Wipe This field allows users to securely erase data from all internal storage devices.
NOTE: Data wipe will cause data loss on all the internal hard drives.
BIOS recovery This option enables the user to recover from certain corrupted BIOS conditions
from a recovery file on the user primary hard drive or an external USB key.
• BIOS recovery from the hard drive
Follow the procedure to recover BIOS from hard drive.
1. Power on the system.
2. While the blue Dell logo is visible, press the F2 key to enter the System Setup.
3. Press the Num Lock key, and verify that the Num Lock light is on.
4. Press the Caps Lock key, and verify that the Caps Lock light is on.
5. Press the Scroll Lock key, and verify that the Scroll Lock light is on.
6. Press the Alt + F keys at the same time. The system will beep as the setup
defaults are restored.
7. Press the Alt + F keys at the same time to restart the system. The changes are
automatically saved.
Cloud desktop screen options
Option Description
Server Lookup
Method
This option specifies how the Cloud Desktop software will lookup the server
address. The options are:
• Static IP - Uses the static IP address
• DNS - Obtains several IP addresses using the Domain Name System (DNS)
protocol. This option is selected by default
NOTE: This option is relevant only when the Integrated NIC control in the
System Configuration group is set to Enable with Cloud Desktop.
Server Name This option specifies the server name of the server.
NOTE: This option is relevant only when the Integrated NIC control in the
System Configuration group is set to Enable with Cloud Desktop, and when
the server look up method is set to DNS.
46
To Next Page
Loading...
