3. Install the Stand.
4. Follow the procedure in After working inside your computer
Stand
Removing the stand
The following procedure applies only to systems that are shipped with a Height adjustable stand (HAS) stand :
1. Follow the procedure in Before working inside your computer.
2. To avoid damaging the display, place the system on a flat, soft, and clean surface .
3. To remove the stand:
a) Press and slide the release tab forward on the cover [1].
b) Hold the tab in the release position and lift the stand upward [2].
c) Slide downward to lift the stand off the back cover [3].
20
Removing and Installing components
To Next Page
Loading...
