4. Install the following components:
a) System board shield
b) Back cover
c) Stand
5. Follow the procedure in After working inside your computer.
Solid State Drive -2230
Removing the 2230 SSD card
1. Follow the procedure in Before working inside your computer.
2. Remove the following components:
a) Stand
b) Back cover
c) System board shield
3. Remove the screw (M2x2.5) that secures the SSD card to the system board [1].
4. Slide and remove the SSD card from the card slot on the system board [2].
5. Remove the thermal pad [3].
Removing and Installing components
33
To Next Page
Loading...
