3. Install the following components:
a) Base cover
b) System board shield
c) Back cover
d) Stand
4. Follow the procedure in After working inside your computer.
Power supply unit fan - PSU fan
Removing the power supply unit fan -PSU fan
1. Follow the procedure in Before working inside your computer.
2. Remove the following components:
a) Stand
b) Back cover
c) System board shield
d) Base cover
3. To disconnect the PSU fan cable:
a) Unroute the power supply cables from the retention clips in the PSU fan.
b) Disconnect the PSU fan cable form the socket on the system board [1].
c) Unroute the PSU fan cable from the retention tab [2].
60
Removing and Installing components
To Next Page
Loading...
