l) Base cover
m) I/O bracket.
3. Disconnect the following cables from the system board:
• Power supply unit cable [1]
• Camera cable [2]
• Touch cable [3]
• SIO_power,SIO_signal, UAJ, INT_speaker,DMIC cables [4]
• LVDC cable [5]
• Power button board cable [6]
• PSU fan cable [7]
• Back light cable [8]
4. Remove the eight screws (M3x5) that secure the system board to the display assembly base [1].
5. Lift the system board off the display assembly base [2].
Removing and Installing components
69
To Next Page
Loading...
