2. Install the following components:
a) PSU fan
b) PSU
c) Base cover
d) System board shield
e) Back cover
f) Stand
3. Follow the procedure in After working inside your computer.
Microphones
Removing the microphones
1. Follow the procedure in Before working inside your computer.
2. Remove the following components:
a) Stand
b) Back cover
c) System board shield
d) Base cover
e) I/O bracket
f) Speakers
3. To remove the microphone and cable:
a) Disconnect the microphone module cable from the system board [1].
b) Unroute the microphone module cable from the routing guides on the display assembly base [2].
Removing and Installing components
79
To Next Page
Loading...
