Dell OptiPlex 7010 - Removing The Memory; Installing The Memory

DELL™ OPTIPLEX™ 7010 TECHNICAL GUIDEBOOK VER1.0
13
MEMORY
NOTE: Memory modules should be installed in pairs of matched memory size, speed, and technology. If the memory modules
are not installed in matched pairs, the computer will continue to operate, but with a slight reduction in performance. The entire
16GB memory range is available to 64-bit operating systems.
MT DT SFF USFF
Type: DDR3 Synch DRAM Non-ECC Memory 1600MHz
2
DIMM Slots 4 4 4 2
DIMM Capacities Up to 8GB Up to 8GB Up to 8GB Up to 8GB
Minimum Memory 2GB 2GB 2GB 2GB
Maximum System Memory 16GB
1
16GB
1
16GB
1
16GB
1
Memory congurations
16GB
1
DDR3, 1600MHz
2
, (4 x 4GB) X X X
16GB
1
DDR3, 1600MHz
2
, (2 x 8GB) X
8GB
1
DDR3, 1600 MHz
2
, (2 x 4GB) X X X X
6GB
1
DDR3, 1600MHz
2
, ( 2GB + 4GB) X X X X
4GB
1
DDR3, 1600 MHz
2
, (2 x 2GB) X X X X
4GB
1
DDR3, 1600MHz
2
, (1 DIMM) X X X X
2GB DDR3, 1600MHz
2
, (1 DIMM) X X X X
1
To fully utilize 4GB or more of memory requires a 64-bit enabled processor and 64-bit operating system. With 32-bit OS, the total amount of
available memory will be less than 4GB. The amount less depends on the actual system configuration.
2
1600MHz memory will only perform as 1600MHz memory when 3rd generation CPUs are used. It will perform as 1333MHz memory if 2nd
generation i3 2130, i3 2125, i3 2120, G860, G850 CPUs are installed in the system. It will perform as 1066MHz memory if 2nd generation G640,
G630, G540, G530, G460 CPUs are installed in the system.