a. stand
b. back cover
c. cable cover
d. speaker cover
e. speaker
f. hard drive
g. optical drive
h. VESA mount bracket
i. system board shield
j. SSD card
k. WLAN card
l. memory
m. heat sink
n. system fan
o. processor
p. coin cell battery
q. power supply unit
r. system board
s. chassis frame
3. To remove the display panel:
a. Disconnect the cables from the connectors [1].
b. Remove the screws that secure the display panel to the bezel.[2].
c. Lift the display panel away from the bezel. [3].
Installing the display panel
1. Align the display panel with the screw holes on the computer.
2. Tighten the screws to secure the display panel to the computer.
3. Connect the cables to the connectors.
4. Install the:
a. chassis frame
b. system board
c. power supply unit
d. coin cell battery
e. system fan
f. processor
g. heat sink
h. memory
i. WLAN card
j. system board shield
46
Disassembly and reassembly
To Next Page
Loading...
