EasyManua.ls Logo

Dell OptiPlex 990 - Input;Output Panel Service; Removing the Input;Output Board

Dell OptiPlex 990
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DELL™ OPTIPLEX™ 990 TECHNICAL GUIDEBOOK —VERSION 1.5
35
1
For hard drives, GB means 1 billion bytes ; actual capacity varies with preloaded material and operating environment and will be less.
HARD DRIVES
1
(CONT.)
2.5” 128GB
1
SATA SOLID STATE DRIVE
Capacity (bytes) 128,035,676,160
Dimensions inches (W x D x H) 3.94 x 2.75 x 0.374
Interface type and Maximum speed
Up to 6Gb/s (SATA 3.0)
Up to 3Gb/s (SATA 2.0)
MTBF 1M hours
Average Seek Time n/a
Logical Blocks 250,069,680
Power Source
Power Consumption (reference only) Idle 1W, Active 1.25W
Spin Up Current (reference only) 5V (1000mA)
Environmental Operating Conditions (Non-Condensing):
Temperature Range 0°C to 70°C
Relative Humidity Range 10 to 90%
Maximum Wet Bulb Temperature 29°C
Altitude Range -200 to 5,000 m
Op Shock (@0.5ms) 1,500G
Environmental Non-Operating Conditions (Non-Condensing):
Temperature Range -55°C to 95°C
Relative Humidity Range 5 to 95%
Maximum Wet Bulb Temperature 38°C
Altitude Range -200 to 10,600 m

Other manuals for Dell OptiPlex 990

Related product manuals