amber light — Blinking amber indicates a problem
with an installed device; solid amber indicates an
internal power problem (see "Power Problems").
solid green light indicates network connection
Link integrity light (on integrated network adapter)
green light for 10-Mb operation; orange light for 100-
Mb operation; yellow light for a 1000-Mb (1-Gb)
operation
Activity light (on integrated network adapter)
four lights on the back panel (see "Diagnostic Lights")
AUX_PWR on the system board
751 BTU/hr
NOTE: Heat dissipation is calculated based upon the
power supply wattage rating.
manual selection power supplies — 90 to 135 V at
50/60Hz;180to265Vat50/60Hz
3-V CR2032 lithium coin cell
10°to35°C(50°to95°F)
–40°to65°C(–40°to149°F)
20% to 80% (noncondensing)
0.25 G at 3 to 200 Hz at 0.5 octave/min
0.5 G at 3 to 200 Hz at 1 octave/min
bottom half-sine pulse with a change in velocity of 20
inches/sec (50.8 cm/sec)
27-G faired square wave with a velocity change of
200 inches/sec (508 cm/sec)
–15.2 to 3048 m (–50 to 10,000 ft)
–15.2 to 10,668 m (–50 to 35,000 ft)