372 Dell PowerConnect 55xx Systems User Guide
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Contax\CxUGSystemConfig.fm
DELL CONFIDENTIAL – PRELIMINARY 9/11/12 - FOR PROOF ONLY
Displaying Device Versions Using the CLI
The following table summarizes the CLI commands for viewing fields
displayed in the Versions page.
The following is an example of the CLI commands:
Reset
Use the Reset
page to reset the device from a remote location.
To reset a unit in the stack:
1
If changes were made to the Running Configuration file, save them to the
Startup Configuration file before resetting the device. This prevents the
current device configuration from being lost. For more information about
saving Configuration files, see "Copy Files" on page 362.
Table 9-70. Versions CLI Commands
CLI Command Description
show version [unit-id] Displays system version information for a
unit or for the whole stack.
console> show version 2
Unit SW Version Boot Version HW Version
---- ------------- ------------- ------------
2 1.0.0.8 1.0.0.02 00.00.01
To Next Page
Loading...
