Dell PowerConnect 55xx Systems User Guide 603
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Contax\CxUGSwitching_iscsi.fm
DELL CONFIDENTIAL – PRELIMINARY 9/11/12 - FOR PROOF ONLY
Defining iSCSI Targets Using CLI Commands
The following table summarizes the CLI commands for defining fields
displayed in the iSCSI Targets Table .
The following is an example of the CLI commands:
Table 20-2. iSCSI Targets Table CLI Commands
CLI Command Description
iscsi target port tcp-port-1
[tcp-port-2… tcp-port-8]
[address ip-address] [name
target-name]
no iscsi target port tcp-
port-1 [tcp-port-2… tcp-port-
8] [address ip-address]
Configures iSCSI port/s, target address
and name.
Use the no form of this command to
delete an iSCSI target.
show iscsi sessions Show the current iSCSI targets and
sessions.
console(config)# iscsi target port 30001 address
176.16.1.1 name iqn.1993-11.com.disk
vendor:diskarrays.sn.45678.tape:sys1.xyz
To Next Page
Loading...
