Dell POWERCONNECT 5548P - Page 660

Dell PowerConnect 55xx Systems User Guide 659
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Contax\CxUGQoS.fm
DELL CONFIDENTIAL – PRELIMINARY 9/11/12 - FOR PROOF ONLY
To select the priority method and enter WRR weights:
1
Click Quality of Service > General > Queue in the tree view to display
the
Queue page.
Figure 22-3. Queue
The queues are displayed.
2 Enter the parameters for the queues:
–
Strict Priority — Check to indicate that traffic scheduling for the
selected queue, and all higher queues, is based strictly on the queue
priority.
–
WRR — Check to indicate that traffic scheduling for the selected
queue is based on WRR. The time period is divided between the
WRR queues that are not empty, meaning they have descriptors to
egress. This happens only if strict priority queues are empty.