Dell PowerConnect 6024 - Page 349

Configuring Routing 359
3 Define the fields in the page.
4 Click Apply Changes .
The new OSPF virtual link is added.
Modifying Virtual Links
1 Open the Virtual Links page.
2 Select an area ID from the Area ID drop-down menu.
The field parameters display.
3 Modify the desired fields.
4 Click Apply Changes .
The OSPF virtual link parameters are modified and saved to the device.
Deleting an OSPF Virtual Link
1 Open the Virtual Links page.
2 Click Show All to display the Virtual Links Table .
3 Select an virtual link.
The field parameters for the table entry display.
4 Check the Remove check box.
5 Click Apply Changes .
The virtual link is removed, and the device is updated.
Viewing OSPF Virtual Links Using CLI Commands
The following table contains the CLI commands for defining OSPF areas.
Table 8-10. OSPF Virtual Link CLI Commands
CLI Command Description
show ip ospf
virtual-links
[area
area-id ]
[router
router-
id
]
Displays the parameters and current state of OSPF virtual
links.
router ospf area
area-id virtual-
link router-id
Adds a virtual link.