Dell PowerConnect 6024 - Page 432

442 Configuring Quality of Service
www.dell.com | support.dell.com
Figure 10-8. QoS TCP to Queue Page
Select TCP Port from List — Selects a known TCP port for mapping to a queue.
Insert TCP Port — Enables manually entering a TCP port for mapping to a queue.
Map to Queue — Indicates the queue to which the specified TCP port is mapped.
Mapping a Known TCP Port to a Queue
1 Open the TCP to Queue page.
2 Select the Select TCP Port from List option.
3 Select a TCP port.
4 Select a queue from the Map to Queue list.
5 Click Apply Changes .
The TCP port is mapped to the specified queue, and the device is updated.
Mapping an Unlisted TCP Port to a Queue
1 Open the QoS TCP to Queue page.
2 Select the Insert TCP Port option.
3 Enter the TCP port number and description in the Insert TCP Port field.
4 Select a queue from the Map to Queue list.
5 Click Apply Changes .
The TCP port is mapped to the specified queue, and the device is updated.