130 Device Security
console#show captive-portal
Administrative Mode....................... Enabled
Operational Status........................ Enabled
Disable Reason............................ Administrator Disabled
Captive Portal IP Address................. 1.2.3.4
Example 6: Show Captive Portal Instances
To show the status of all Captive Portal instances in the system, use the following command:
console#show captive-portal status
Additional HTTP Port........................... 81
Additional HTTP Secure Port.................... 0
Peer Switch Statistics Reporting Interval...... 300
Authentication Timeout......................... 600
Supported Captive Portals...................... 10
Configured Captive Portals..................... 2
Active Captive Portals......................... 1
System Supported Users......................... 1024
Local Supported Users.......................... 128
Authenticated Users............................ 0
To Next Page
Loading...
