Dell PowerConnect 6224 - Sntp Unicast Client Enable

Clock Commands 1103
Default Configuration
No keys are trusted.
Command Mode
Global Configuration mode
User Guidelines
This command is relevant for both received Unicast and Broadcast.
Example
The following defines SNTP trusted-key.
console(config)# sntp authentication-key 8 md5 ClkKey
console(config)# sntp trusted-key 8
console(config)# sntp authenticate
sntp unicast client enable
Use the sntp unicast client enable command in Global Configuration mode
to enable a client to use Simple Network Time Protocol (SNTP) predefined
Unicast clients. To disable an SNTP Unicast client, use the no form of this
command.
Syntax
sntp unicast client enable
no sntp unicast client enable
Default Configuration
The SNTP Unicast client is disabled.
Command Mode
Global Configuration mode
User Guidelines
Use the sntp server command to define SNTP servers.