Dell PowerConnect 6224 - Page 121

Command Groups 121
Line
dos-control sipdip Enables Source IP Address = Destination IP
Address (SIP=DIP) Denial of Service
protection.
GC
dos-control tcpflag Enables TCP Flag Denial of Service
protections.
GC
dos-control tcpfrag Enables TCP Fragment Denial of Service
protection.
GC
ip icmp echo-reply Enables or disables the generation of ICMP
Echo Reply messages.
GC
ip icmp error-interval Limits the rate at which IPv4 ICMP error
messages are sent.
GC
ip icmp unreachables Enables the generation of ICMP Destination
Unreachable messages.
IC
ip icmp redirects Enables the generation of ICMP Redirect
messages.
IC
ipv6 icmp error-internal Limits the rate at which ICMPv6 error messages
are sent.
GC
ipv6 unreachables Enables the generation of ICMPv6 Destination
Unreachable messages.
IC
show dos-control Displays Denial of Service configuration
information.
PE
NOTE: *For the meaning of each Mode abbreviation, see "Mode Types" on page 60.
Command Description Mode*
exec-timeout Configures the interval that the system waits for
user input.
LC
history Enables the command history function. LC
history size Changes the command history buffer size for a
particular line.
LC
Command Description Mode*