Dell PowerConnect 6224 - Show Ip Telnet

Telnet Server Commands 1349
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration
Usage Guidelines
No specific guidelines.
Example
console(config)#ip telnet port 45
console(config)#no ip telnet port
show ip telnet
The show ip telnet command displays the status of the Telnet server and the
Telnet service port number.
Syntax
show ip telnet
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC
Example
(console)#show ip telnet
Telnet Server is Enabled. Port:23