Using the CLI 161
Please enter the IP address of the device (A.B.C.D) or
enter "DHCP" (without the quotes) to automatically
request an IP address from the network DHCP server.
192.168.2.1<Enter>
Please enter the IP subnet mask (A.B.C.D or /nn):
255.255.255.0<Enter>
Step 4:
Finally, set up the gateway. Please enter the IP
address of the gateway from which this network is
reachable
192.168.1.1<Enter>
This is the configuration information that has been
collected:
SNMP Interface = "public"@192.168.2.1
User Account setup = admin
Password = **********
Management IP address = 192.168.2.1 255.255.255.0
Gateway = 0.0.0.0
Step 5:
If the information is correct, please select (Y) to
save the configuration, and copy to the start-up
configuration file. If the information is incorrect,
select (N) to discard configuration and restart the
wizard: [Y/N]
y<Enter>
Thank you for using the Dell Easy Setup Wizard. You
will now enter CLI mode.
.....
console>
To Next Page
Loading...
