180 Using the CLI
5 - Display operational code vital product data
6 - Abort code update
7 - Update boot code
8 - Delete backup image
9 - Reset the system
10 - Restore Configuration to factory defaults
(delete config files)
11 - Activate Backup Image
12 - Password Recovery Procedure
The boot utility menu provides the following:
• Option to set baud rate of the serial port.
[Boot Menu]2
Select baud rate:
1 - 1200
2 - 2400
3 - 4800
4 - 9600
5 - 19200
6 - 38400
7 - 57600
8 - 115200
0 - no change
The previously described setting takes effect immediately.
• Option to retrieve event log using XMODEM.
To Next Page
Loading...
