184 Using the CLI
• Option to Delete backup image. The user is not allowed to delete active
image.
[Boot Menu] 8
Are you SURE you want to delete backup code :
image2 ? (y/n):
• Option to Clear All Flash and Reset the System to Default Setting. User
action will be confirmed with a Y/N question before executing the
command. The following is the procedure to reset the system through
Boot Menu:
[Boot Menu] 9
Are you SURE you want to reset the system? (y/n):y
Boot code......
Boot Menu Version: 3.2.0.1
Select an option. If no selection in 10 seconds
then operational code will
start.
1 - Start operational code.
2 - Start Boot Menu.
Select (1, 2):2
• Option to Boot Without Using Startup Configuration and Only Load
System Default. Selecting 10 from the Boot Menu restores system
defaults. The boot sequence is started by selecting ‘1’ from Boot Menu.
[Boot Menu] 10
Are you SURE you want to delete the startup-
config? (y/n):
To Next Page
Loading...
