224 Address Table Commands
bridge multicast forward-all
Use the bridge multicast forward-all command in Interface Configuration
mode to enable forwarding of all Multicast packets. To restore the default, use
the no form of the bridge multicast forward-all command.
Syntax
bridge multicast forward-all
no bridge multicast forward-all
Default Configuration
Forward-unregistered
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
In this example all VLAN1 Multicast packets are forwarded.
console(config-if-vlan1)#bridge multicast forward-all
bridge multicast forward-unregistered
Use the bridge multicast forward-unregistered command in Interface
Configuration mode to enable the forwarding of unregistered multicast
addresses.
Syntax
bridge multicast forward-unregistered
Default Configuration
Forward-unregistered
To Next Page
Loading...
