Dell PowerConnect 6224 - Page 230

230 Address Table Commands
Syntax
show bridge address-table static [vlan vlan ] [ethernet interface |port-channel
port-channel-number
]
• vlan — Specific valid VLAN, such as VLAN 1.
•
interface — A valid Ethernet port .
• port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
In this example, all static entries in the bridge-forwarding database are
displayed.
console#show bridge address-table static
Vlan Mac Address Port Type
---- -------------- ----- -----
1 0001.0001.0001 1/g1 Static
show bridge multicast address-table
Use the show bridge multicast address-table command in Privileged EXEC
mode to display Multicast MAC address table information.
Syntax
show bridge multicast address-table [vlan vlan-id ] [address mac-multicast-
address
| ip-multicast-address ] [format ip | mac]
• vlan_id — A valid VLAN ID value.