246 CDP Interoperability Commands
1/g17 Enabled
1/g18 Enabled
1/g19 Enabled
1/g20 Enabled
1/g21 Enabled
1/g22 Enabled
1/g23 Enabled
1/g24 Enabled
console#show isdp interface ethernet 1/g1
Interface Mode
--------------- ----------
1/g1 Enabled
show isdp neighbors
The show isdp neighbors command displays the list of neighboring devices.
Syntax
show isdp neighbors { ethernet
interface
| detail }
•
interface
— Specifies a valid interface. The full syntax is unit/port.
•
detail
— Show detailed information about the neighbors.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
To Next Page
Loading...
