Dell PowerConnect 6224 - Add Port-Channel; No Add Port-Channel

398 Link Dependency Commands
add port-channel
Use the add port-channel command to add member port-channels to the
dependency list.
Syntax
add port-channel port-channel-list
• port-channel-list — List of port-channel interfaces. Separate
nonconsecutive ports with a comma and no spaces. Use a hyphen to
designate the range of ports. (Range: Valid port-channel interface list or
range)
Default Configuration
This command has no default configuration.
Command Mode
Link Dependency mode
User Guidelines
No specific guidelines
Example
console(config-linkDep-group-1)#add port-channel 2
no add port-channel
Use the no add port-channel command to remove member port-channels
from the dependency list.
Syntax
no add port-channel port channel list
• port-channel-list — List of port-channel interfaces. Separate
nonconsecutive ports with a comma and no spaces. Use a hyphen to
designate the range of ports. (Range: Valid port-channel interface list or
range)