QoS Commands 475
Default Configuration
This command has no default configuration.
Command Mode
Class-Map Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays adding a match condition for the VLAN ID
"2."
console(config-classmap)#match vlan 2
mirror
Use the mirror command in Policy-Class-Map Configuration mode to mirror
all the data that matches the class defined to the destination port specified.
Syntax
mirror
interface
•
interface
— Specifies the Ethernet port to which data needs to be copied.
Default Configuration
This command has no default configuration.
Command Mode
Policy-Class-Map Configuration mode
User Guidelines
The port identified in this command is identical to the destination port of the
monitor command.
To Next Page
Loading...
