Dell PowerConnect 6224 - Page 514

514 RADIUS Commands
Retransmit : 3
Deadtime : 0
Source IP : 0.0.0.0
RADIUS Attribute 4 Mode : Disable
RADIUS Attribute 4 Value : 0.0.0.0
console#show radius-servers accounting name
Server Name Host Address Port Type
-------------------------------- ------------------------ ------ --
--------
Default-RADIUS-Server 2.2.2.2 1813
Secondary
console#show radius-servers name Default-RADIUS-Server
RADIUS Server Name............................. Default-RADIUS-
Server
Current Server IP Address...................... 1.1.1.1
Retransmits.................................... 4
Timeout........................................ 5
Deadtime....................................... 0
Port........................................... 1812
Source IP...................................... 0.0.0.0
Secret Configured.............................. No
Message Authenticator.......................... Enable
show radius-servers statistics
Use the show radius-servers statistics command to show the statistics for an
authentication or accounting server.