Dell PowerConnect 6224 - Page 518

518 RADIUS Commands
Unknown Types................................. 0
Packets Dropped............................... 0
console#show radius-server statistics name
Default_RADIUS_Server
RADIUS Server Name............................
Default_RADIUS_Server
Server Host Address...........................
192.168.37.200
Access Requests............................... 0.00
Access Retransmissions........................ 0
Access Accepts................................ 0
Access Rejects................................ 0
Access Challenges............................. 0
Malformed Access Responses.................... 0
Bad Authenticators............................ 0
Pending Requests.............................. 0
Timeouts...................................... 0
Unknown Types................................. 0
Packets Dropped............................... 0
source-ip
Use the source-ip command in Radius mode to specify the source IP address
to be used for communication with Radius servers. 0.0.0.0 is interpreted as a
request to use the IP address of the outgoing IP interface.
Syntax
source-ip source
• source — A valid source IP address.