Dell PowerConnect 6224 - Page 520

520 RADIUS Commands
Example
The following example specifies the timeout setting for the designated
Radius Server.
console(config)#radius-server host 192.143.120.123
console(config-radius)#timeout 20
usage
Use the usage command in Radius mode to specify the usage type of the
server.
Syntax
usage type
• type — Variable can be one of the following values: login , 802.1x or all .
Default Configuration
The default variable setting is all.
Command Mode
Radius mode
User Guidelines
User must enter the mode corresponding to a specific Radius server before
executing this command.
Example
The following example specifies usage type login .
console(config)#radius-server host 192.143.120.123
console(config-radius)#usage login