612 Voice VLAN Commands
voice vlan
This command is used to enable the voice vlan capability on the switch.
Syntax
voice vlan
no voice vlan
Parameter Ranges
Not applicable
Command Mode
Global Configuration
Usage Guidelines
Not applicable
Default Value
This feature is disabled by default.
Example
console(config)#voice vlan
console(config)#no voice vlan
voice vlan (Interface)
This command is used to enable the voice vlan capability on the interface.
Syntax
voice vlan {
vlanid
| dot1p
priority
| none | untagged | data priority { trust |
untrust } | auth { enable | disable } | dscp
dscp
}
no voice vlan
•
vlanid
—
The voice VLAN ID.
•
priority
—
The Dot1p priority for the voice VLAN on the port.
To Next Page
Loading...
