632 802.1x Commands
Field Description
Port The port number.
Admin mode The port admin mode. Possible values are: Force-auth,
Force-unauth, Auto, and mac-based.
Oper mode The control mode under which this port is operating.
Possible values are: Authorized or Unauthorized.
Reauth Control Indicates whether re-authentication is enabled on this
port.
Reauth Period The timer used by the authenticator state machine on this
port to determine when reauthentication of the supplicant
takes place. The value is expressed in seconds and will be
in the range of 1 and 65535.
Username The username representing the identity of the Supplicant.
This field shows the username when the port control is
auto or mac-based. If the port is Authorized, it shows the
username of the current user. If the port is unauthorized it
shows the last user that was authenticated successfully.
Quiet period The number of seconds that the switch remains in the
quiet state following a failed authentication exchange (for
example, the client provided an invalid password).
Transmit period The number of seconds that the switch waits for a
response to an Extensible Authentication Protocol
(EAP)-request/identity frame from the client before
resending the request.
Maximum Requests The maximum number of times that the switch sends an
Extensible Authentication Protocol (EAP)-request frame
(assuming that no response is received) to the client
before restarting the authentication process.
Max Users The maximum number of clients that can get
authenticated on the port in the MAC-based dot1x
authentication mode.
VLAN Assigned The VLAN assigned to the client by the radius server.
When VLAN assignments are disabled, RADIUS server
does not assign any VLAN to the port, and this field is
blank.
To Next Page
Loading...
