642 802.1x Commands
Multiple Hosts column and add an Unauthenticated VLAN column, which
indicates whether an unauthenticated VLAN is configured on a port. The
command has also been updated to show the Guest VLAN ID (instead of the
status) since it is now configurable per port.
Syntax
show dot1x advanced [ethernet
interface
]
•
interface
— Specifies a valid ethernet interface.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays 802.1x advanced features for the switch.
console#show dot1x advanced
Port Guest Unauthenticated
VLAN Vlan
--------- --------- ---------------
1/g1 Disabled Disabled
1/g2 10 20
1/g3 Disabled Disabled
1/g4 Disabled Disabled
1/g5 Disabled Disabled
1/g6 Disabled Disabled
To Next Page
Loading...
