DHCPv6 Commands 665
Default Configuration
This command has no default configuration.
Command Mode
IPv6 DHCP Pool Configuration mode
User Guidelines
DHCPv6 pool can have multiple number of domain names with maximum of
8.
Example
The following example sets the ipv6 DNS server address of 2020:1::1, which is
provided to a DHCPv6 client by the DHCPv6 server.
console(config)#ipv6 dhcp pool addrpool
console(config-dhcp6s-pool)#dns-server 2020:1::1
domain-name
Use the domain-name command in IPv6 DHCP Pool Configuration mode to
set the DNS domain name which is provided to a DHCPv6 client by the
DHCPv6 server. DNS domain name is configured for stateless server support.
Syntax
domain-name
dns-domain-name
no domain-name
dns-domain-name
•
dns-domain-name
— DHCPv6 domain name. (Range: 1–255 characters)
Default Configuration
This command has no default configuration.
Command Mode
IPv6 DHCP Pool Configuration mode
To Next Page
Loading...
