666 DHCPv6 Commands
User Guidelines
DHCPv6 pool can have multiple number of domain names with maximum of
8.
Example
The following example sets the DNS domain name "test", which is provided
to a DHCPv6 client by the DHCPv6 server.
console(config)#ipv6 dhcp pool addrpool
console(config-dhcp6s-pool)#domain-name test
console(config-dhcp6s-pool)#no domain-name test
ipv6 dhcp pool
Use the ipv6 dhcp pool command in Global Configuration mode to enter
IPv6 DHCP Pool Configuration mode. DHCPv6 pools are used to specify
information for DHCPv6 server to distribute to DHCPv6 clients. These pools
are shared between multiple interfaces over which DHCPv6 server
capabilities are configured.
Syntax
ipv6 dhcp pool
pool-name
no ipv6 dhcp pool
pool-name
•
pool-name
— DHCPv6 pool name. (Range: 1-31 characters)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
To Next Page
Loading...
