Dell PowerConnect 6224 - Page 669

DHCPv6 Commands 669
Example
The following example configures the number 100 to represent the DHCPv6
Relay Agent Information Option.
console(config)#ipv6 dhcp relay-agent-info-opt 100
ipv6 dhcp relay-agent-info-remote-id-subopt
Use the ipv6 dhcp relay-agent-info-remote-id-subopt command in Global
Configuration mode to configure a number to represent the DHCPv6 the
“remote-id” sub-option.
Syntax
ipv6 dhcp relay-agent-info-remote-id-subopt suboption
• suboption — Remote ID suboption. (Range: 1-65535)
Default Configuration
The default value for suboption is 1 .
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configures the number 100 to represent the DHCPv6
the “remote-id” sub-option.
console(config)#ipv6 dhcp relay-agent-info-remote-id-
subopt 100
ipv6 dhcp server
Use the ipv6 dhcp server command in Interface Configuration mode to
configure DHCPv6 server functionality on an interface. For a particular
interface DHCPv6 server and DHCPv6 relay functions are mutually exclusive.