74 Command Groups
Link Dependency
LLDP
show lacp port-channel Displays LACP information for a port-channel. PE
NOTE: *For the meaning of each Mode abbreviation, see "Mode Types" on page 60.
Command Description Mode*
link-dependency group Enters the link-dependency mode to
configure a link-dependency group.
GC
no link-dependency
group
Removes the configuration for a link-
dependency group.
GC
add ethernet Adds member Ethernet port(s) to the
dependency list.
Link Dependency
no add ethernet Removes member Ethernet port(s)
from the dependency list.
Link Dependency
add port-channel Adds member port-channels to the
dependency list.
Link Dependency
no add port-channel Removes member port-channels from
the dependency list.
Link Dependency
depends-on ethernet Adds the dependent Ethernet ports list. Link Dependency
no depends-on ethernet Removes the dependent Ethernet ports
list.
Link Dependency
depends-on port-
channel
Adds the dependent port-channels list. Link Dependency
no depends-on port-
channel
Removes the dependent port-channels
list.
Link Dependency
show link-dependency Shows the link dependencies configured
on a particular group.
PE
NOTE: *For the meaning of each Mode abbreviation, see "Mode Types" on page 60.
Command Description Mode*
clear lldp remote data Deletes all data from the remote data table. PE
Command Description Mode*
To Next Page
Loading...
