IPv6 Routing Commands 783
ipv6 nd ra-interval
Use the ipv6 nd ra-interval command in Interface Configuration mode to set
the transmission interval between router advertisements.
Syntax
ipv6 nd ra-interval
maximum
minimum
no ipv6 nd ra-interval
•
maximum
— The maximum interval duration (Range: 4–1800 seconds).
•
minimum
— The minimum interval duration (Range: 3 – (0.75 *
maximum) seconds).
Default Configuration
600 is the default value for
seconds
.
Command Mode
Interface Configuration (VLAN, Tunnel, Loopback) mode
User Guidelines
The minimum interval cannot be larger than 75% of the maximum interval.
Example
The following example sets the transmission interval between router
advertisements at 1000 seconds.
console(config)#interface vlan 15
console(config-if-vlan15)#ipv6 nd ra-interval 1000
ipv6 nd ra-lifetime
Use the ipv6 nd ra-lifetime command in Interface Configuration mode to set
the value that is placed in the Router Lifetime field of the router
advertisements sent from the interface.
To Next Page
Loading...
